Bottom Deck Spacer   (bpds)   Go Back
   
description
  Go Back

The bottom deck spacer has been designed to support both mesh and large bars in suspended decks, precast beams and panels, and tilt-up applications. As an alternative to wire chairs and concrete blocks in several applications, the bottom deck spacers are lighter, offer dual heights and have no rust problems.

Strong and stable, the spacers have 5 small dimples that are grey for minimum exposure. The dimples also allow for tie wire to be placed under the spacer for fixing reo if required.

Having supports for the reo with no clips, means one spacer fits all common reo sizes, saves steel-fixing time in horizontal applications, and the strain on hands pushing clips all day.
 

ideal for

- Suspended Decks and Beams
- Tilt-Up Panels
- Precast Panels and Beams
- Blinding Concrete


size availablity

All bottom deck spacers are combination (dual heights).

15/20mm, 25/30mm, 35/40mm and 45/50mm.

* For heights over 50mm and up to 220mm, the combination top deck spacers, combination panel chairs and deck chairs are also available.
 
DIMENSIONS



Order code
Height
  
Mass Per
Bag kg
a
b
BPDS15/20
15
20
0.7
BPDS25/30
25
30
1.1
BPDS35/40
35
40
1.6
BPDS45/50
45
50
1.9
All dimensions are nominal and expressed in millimetres.

All sizes are packed in bags of 100 and pallet quantities are nominally 5,000 pieces.
 
TYPICAL APPLICATIONS

                      Mesh in Tilt-up Panels                             Bar in Suspended Decks
 
 
 
Phone:
Fax:
Email:
 
   
  Dowload PDF Data Sheet to Save or Print  Modfix_SD_BottomDeckSpacer.pdf


  Go Back    Go Forward









 BACK  TOP -


 



Web Site Designed & Maintained by Wizard Graphics - Hosting and Domain Management by Big Red Roo Internet Services - Proudly Australian