Top Deck Spacer   (bpdst)   Go Back
   
description
  Go Back

The top deck spacer has been designed to support both top mesh and top reinforcing bars in suspended decks, thick precast and tilt-up panels and any tall spacer applications, where strength and stability is critical.

Load tested to over 300 kg, the spacer leaves a minimal foot print and is supplied in a grey colour.

Unlike wire alternatives, the top deck spacer offers dual heights, will not rust or spread under normal construction loads and can still be handled in extreme heat.

An added feature is a cross bar between the dual supports, to allow tying the reo with wire, if required.


size availablity

All top deck spacers are combination (dual heights).

65/75mm, 90/100mm, 110/120mm, 130/140mm, 150/160mm, 170/180mm and 190/200mm.

* For heights below 65mm, the combination bottom deck spacers, fastclip bar/mesh and heavy duty barchairs are also available.

 



ideal for


- Top reo in Suspended Decks or Beams
- Thick Precast and Tilt-Up Panels
- Thick Concrete Elements
- All reo especially bars exceeding 16mm


 
DIMENSIONS


Order code
Height
Mass Per
Bag kg
Pallet
Quantity
a
b
BPDST 65/75
65
75
3.1
4500
BPDST 90/100
90
100
3.7
4200
BPDST110/120
110
120
4.3
4200
BPDST130/140
130
140
4.7
4000
BPDST150/160
150
160
5.2
3000
BPDST170/180
170
180
5.7
3000
BPDST190/200
190
200
6.3
3000

All dimensions are nominal and expressed in millimetres.

All sizes are packed in bags of 50 pieces.
   
 
TYPICAL APPLICATIONS

   
             Two Layers of Mesh in Precast Panel                 Bar in Suspended Decks
 
 
Phone:
Fax:
Email:
 
   
  Dowload PDF Data Sheet to Save or Print  Modfix_SD_TopDeckSpacer.pdf


  Go Back    Go Forward









 BACK  TOP -


 



Web Site Designed & Maintained by Wizard Graphics - Hosting and Domain Management by Big Red Roo Internet Services - Proudly Australian