ferrule support chairs®
Go Back
   
 
   
description
Go Back

An easy-to-use ferrule chair developed to locate ”face-up” ferrules in precast panels and tilt-up panels. This chair is designed to locate the (ferrule with antennae cap) to about 1 to 2mm below the panel surface when a 96mm ferrule is used. A major time saver the ferrule chair is manufactured to provide a strong, impact resistant support which is non-corrosive and having minimal exposure.

ideal for

The Panel Industry


  



size availablity

Available to suit a 96mm ferrule for panel thicknesses of 125,150,175, 180 and 200mm

DIMENSIONS
Order Code
A
B
Number Per Bag
Mass Per Bag kg
FWSC125/96
96
125
50
4.3
FWSC150/96
96
150
50
4.5
FWSC175/96
96
175
50
5.5
FWSC180/96
96
180
50
6.0
FWSC200/96
96
200
50
6.4
*Antenna cap located with 1 to 2mm clearance for screeding.
Packed in bags of 50.
All dimensions are nominal and expressed in millimetres.
Note: Other ferrule lengths and widths can be accommodated subject to volume and timing.
   
  
ANTENNAE CAPS
description
Go Back

Designed to protect the threads of ferrules while pouring and screeding. Provides effective seal through a tight push fit and a ridge which locks into the thread.
  
Order Code
Colour
Height
Number Per Bag
Mass Per Bag kg
FWAC12
Red
12mm
100
0.1
FWAC16
Green
16mm
100
0.1
FWAC20
Blue
20mm
100
0.2
FWAC24
Yellow
24mm
100
0.2
Note: Sizes are colour coded for easy reference.
     
 
Phone:
Fax:
Email: 		 
 
   
Dowload PDF Data Sheet to Save or Print Modfix_PCF_FerruleSupportChair.pdf