panel chairs   Go Back
   
description
  Go Back

The new panel chair from Modfix has been designed to support single layered mesh in tilt-up, precast panels and some suspended deck applications.

The chairs provide covers of 50 and 60mm as well as 65 and 75mm to suit popular panel thicknesess of 100, 120, 130, 150 and 170mm. With four strong stable legs the chair can support the mesh whilst walking over it without collapsing or tipping.

Dimples located at the base of the legs ensure minimum exposure and the chair is coloured a consistent grey to match the concrete.

The easy push on clip mechanism allows the chair to swing into a vertical position, when lowering the mesh into the form and suits all mesh sizes including Y12 bars.

ideal for
Precast and tilt-up panels.


 




size availablity

Provides covers of 50 and 60mm as well as 65 and 75mm for panel thicknesses of 100, 120, 130, 150 and 170mm.

DIMENSIONS

PRODUCT CODE
BCPANEL50/60
BCPANEL65/75
PALLET QUANTITY
5000
5000
BAG QUANTITY
100
100
MASS/BAG
2.1kg
2.6kg

Note all dimensions are nominal and expressed in millimetres.
   
 
LOAD PERFORMANCE


Tests were conducted at Modfix’s own testing facilities and are indicative of load performances, at temperatures indicated.
   
 
TYPICAL APPLICATIONS

 
 
Phone:
Fax:
Email:
 
   
  Dowload PDF Data Sheet to Save or Print  Modfix_PCF_PanelChair.pdf


  Go Back    Go Forward









 BACK  TOP -


 



Web Site Designed & Maintained by Wizard Graphics - Hosting and Domain Management by Big Red Roo Internet Services - Proudly Australian